The DN1-DR-RD filler is capable of filling non-foaming liquid and semi-liquid products into containers from 20 to 220 liters (5 to 55 gallons). It is normally used for filling 50 to 220 liters (15 to 55 gallons).

Machine contact parts are available in brass and steel, 316 stainless steel, Sanitary stainless steel, and titanium to meet the requirements of most products.

The operator rolls a container on the platform below the nozzle and presses the operating button. The nozzle tip descends into the drum approximately 100 mm/4", opens and begins filling. When the container approaches the target weight, "dribble-flow" automatically reduces the flow rate to achieve high accuracy. When the weight reaches the shut-off weight, the nozzle closes and rises. The operator rolls the drum to the discharge conveyor and places the next empty container on the filling platform.

While the next container fills, the operator will normally close and label the last-filled container.

ESTIMATED FILLING SPEED (Per Hour)

DRUM FILLER: Model DN1-DR-ID/S

Sub-Surface Filling

The DN1-DR-RD/S filler is a sub-surface filler capable of filling foaming or non-foaming liquid and semi-liquid products into containers from 20 to 220 liters (5 to 55 gallons). It is normally used for filling 50 to 220 liter (15 to 55 gallons).

Machine contact parts are available in brass and steel, 316 stainless steel, Sanitary stainless steel, and titanium to meet the requirements of most products.

The operator rolls a container on the platform below the nozzle and presses the operating button. The nozzle tip descends to the bottom of the the drum, opens and begins filling. The nozzle rises slowly as the drum fills. When the fill nears the target weight, the product flow is automatically reduced for a highly accurate fill. When the shut-off weight is reached, the nozzle closes and rises. The operator rolls the drum to the discharge conveyor and places the next empty container on the filling platform.

While the next container fills, the operator will normally close and label the last-filled container.

ESTIMATED FILLING SPEED (Per Hour)
DN1-DR-ID DRUM FILLERS

WORLD CLASS PACKAGING MACHINERY FOR THE FOOD, CHEMICAL AND PETROLEUM INDUSTRIES

HOME

REQUEST INFORMATION

For more information regarding filling machinery from CRANDALL INTERNATIONAL , contact:

Keith Crandall, President
CRANDALL INTERNATIONAL, INC.
1109 Military Rd.
Buffalo, NY 14217
USA

Tel: 1-716-876-0402 Fax: 1-716-876-7137
kcrandall@cipak.com